Develop Key SLD, layouts, Protection & Control diagrams of Switchgears, transformers, UPS, generator, VSD, cables, ELV etc.

Perform electrical systems design and calculations, electrical sizing and selection.

Material take-off for procurement.

Prepare Cable Schedule, Cable termination diagram.

Power System Studies using ETAP / SKM

Technical evaluation of equipment, review vendor equipment design/data.

Involve in tender design, costing as required.

Attend project meetings, design coordination meetings as required.

Perform inspection, FAT/SAT and witnessing of tests on major equipment.

Travel to sites for site review, provide engineering evaluations and solutions.

Liaise closely with Consultants, Vendors and Site teams.

Assist superior in other tasks / proposal activities as required.

Ensure Safety & Health procedures is executed at work site

Communicate and coordinate with authorities

Coordinate for relevant work authorisation

Identify, evaluate, recommend and execute work safety

Coordinate the safety, Health and Environment awareness program in the line with OSHA Act

Prepare and submit related safety report

Organize monthly site’s safety & health as required

Assist and monitor sub-contractor with regards to OSHA

• Develop and maintain a comprehensive filing system and document control processes for both hard and electronic documents.
• Register and classify project documents, including drawings, specifications, contracts, correspondence, and reports.
• Ensure that documents are accessible to authorized personnel while maintaining security and confidentiality.

• Monitor the status of documents and drawings to ensure timely approval, updates, and distribution.
• Manage document review, approval, and revision control processes in compliance with company and industry standards.
• Track document versions and remove obsolete documents from circulation.

• Act as a liaison between project teams, contractors, vendors, and clients on document-related matters.
• Ensure timely distribution of documents to relevant parties.
• Coordinate with engineering and project management teams to enforce document control procedures.

• Ensure compliance with industry standards, regulatory requirements, and internal policies.
• Prepare for and participate in internal and external audits of project documentation.
• Implement corrective actions for identified document control issues.

• Maintain and update document control software and systems.
• Provide training to project personnel as needed.
• Troubleshoot and resolve system-related issues.

• Generate regular reports on the status of project documentation.
• Maintain accurate records of document transmittals, revisions, and approvals.

• Identify opportunities to enhance document control processes and implement best practices.
• Stay updated with trends and advancements in document control technologies and methodologies.

• Monitor construction works to ensure compliance with design specifications, codes, and standards.
• Perform regular site inspections and verify workmanship, materials, and methods used.
• Identify and report any deviations or non-conformances from design documents.
• Witness tests and ensure test results meet specifications.

• Maintain detailed daily site reports, including activities, weather conditions, labor count, material deliveries, and issues.
• Prepare non-conformance reports (NCRs), site memos, and site diary.
• Maintain proper records of drawings, change orders, test results, and site correspondence.

• Liaise with contractors, consultants, and client representatives to clarify technical or quality issues.
• Attend site meetings and provide feedback on progress, quality concerns, and safety compliance.
• Ensure updated drawings, revisions, and instructions are implemented on-site.

• Monitor adherence to Health, Safety & Environmental (HSE) policies and statutory requirements.
• Notify relevant parties of unsafe practices or hazards and follow up on corrective actions.
• Ensure relevant parties maintain site cleanliness and proper storage of materials and equipment.

• Inspect and verify all materials delivered to the site match approved samples/specifications.
• Prevent use of substandard or unapproved materials in construction.

• Assist in the preparation and implementation of the Project Quality Plan (PQP) and Inspection and Test Plans (ITPs).
• Ensure quality standards are communicated and enforced among all project teams, subcontractors, and suppliers.
• Coordinate with the Project Manager to ensure company and client-specific quality procedures are applied.

• Conduct routine and special inspections of construction activities to verify conformance to drawings, specifications, and standards.
• Inspect incoming materials and equipment delivery to ensure compliance with specifications and approvals.
• Prepare checklists and carry out pre-installation and post-work inspections.

• Identify and report any Observations or Non-Conformances (NCRs) and follow up on corrective and preventive actions.
• Participate in root cause analysis and propose improvements to avoid repeat issues.

• Maintain up-to-date quality records, including inspection reports, test results, site memos, and NCR logs.
• Compile and submit daily, weekly, and monthly quality reports to the Project Manager.
• Assist in compiling as-built documentation, material approvals, and test certificates for project handover.

• Work closely with site engineers, consultants, and client representatives to resolve quality-related issues.
• Attend project and coordination meetings related to quality control.
• Support internal and external audits conducted by the client or third parties.

• Oversee day-to-day execution of civil, structural, and architectural works on-site.
• Ensure work is carried out as per approved drawings, method statements, and technical specifications.
• Monitor subcontractors’ performance and ensure adherence to schedule, quality, and safety requirements.

• Coordinate with consultants, contractors, suppliers, and other disciplines (MEP, finishes, etc.) for smooth site operations.
• Attend and participate in site meetings, inspections, and coordination reviews.
• Communicate any discrepancies, design issues, or site constraints to the relevant parties for resolution.

• Ensure that all materials and workmanship conform to project specifications and approved standards.
• Conduct pre-pour, formwork, reinforcement, structural steel, and finishing inspections.
• Collaborate with the QA/QC team to resolve any non-conformances and ensure corrective actions are implemented.

• Assist in preparing work schedules, material requisitions, and look-ahead plans.
• Monitor site progress and provide inputs for progress reporting, including tracking daily activities and work quantities.
• Identify potential delays and work with planning and project control teams to maintain timelines.

• Ensure that site safety protocols are followed and that workers are aware of and comply with health, safety, and environmental (HSE) standards.
• Report any unsafe practices or incidents and participate in tool-box talks and safety meetings.

• Maintain accurate site records including daily progress reports (DPRs), inspection reports, site instructions, and material delivery notes.
• Ensure all revisions, technical submittals, and drawings are updated and followed on-site.
• Support the preparation of as-built drawings and project closeout documentation.

• Supervise all CSA-related construction works, including earthworks, formwork, reinforcement, concrete works, structural steel installation, masonry, finishes, and architectural detailing.
• Ensure work is executed according to approved drawings, method statements, and project specifications.
• Monitor the activities of subcontractors and ensure compliance with work schedules and quality expectations.

• Allocate and monitor manpower, materials, and equipment to ensure optimal productivity.
• Ensure that all workers are performing tasks safely and efficiently.
• Support the Site Engineer in organizing site logistics, sequencing of tasks, and managing labor teams.

• Conduct pre-activity checks and ensure all materials used meet project quality standards
• Inspect and verify completed works before formal inspections.
• Report any non-conformities and coordinate rectifications with QA/QC and engineering teams

• Ensure strict implementation of Health, Safety & Environmental (HSE) regulations and site safety plans.
• Conduct toolbox talks, ensure workers wear appropriate PPE, and report unsafe practices.
• Collaborate with the HSE Officer to maintain a safe working environment.

• Coordinate daily work with other disciplines (e.g., MEP, HSE, QA/QC) to prevent work clashes and ensure smooth progress.
• Attend daily coordination meetings with site engineers and contractors.
• Communicate clearly with workers and subcontractors regarding daily tasks, changes, and expectations.

• Maintain daily site records including labor reports, material usage, equipment logs, and work progress.
• Provide input to daily and weekly progress reports for management.
• Ensure red-line markups are recorded for as-built documentation.

• Assist in the development of detailed project schedules using Primavera P6, Microsoft Project, or other planning tools.
• Break down project scope into Work Breakdown Structures (WBS) and sequence activities with dependencies, milestones, and durations.
• Support in preparing baseline programmes, lookahead schedules, and recovery programmes.

• Monitor and update project progress based on inputs from site teams and contractors.
• Highlight critical paths, slippages, and schedule risks through schedule variance and float analysis.
• Generate weekly and monthly progress reports, dashboards, and schedule performance metrics (SPI, CPI).

• Collaborate with project managers, site engineers, procurement, and subcontractors to gather real-time project data.
• Attend coordination meetings and provide schedule updates and inputs.
• Help communicate schedule-related information to internal teams and external stakeholders.

• Maintain accurate planning documentation, including schedule revisions, assumptions, and historical data.
• Track schedule changes and ensure proper approval and documentation.
• Support delay analysis and preparation of extension of time (EOT) claims under guidance.

• Lead the end-to-end implementation of HDD projects for underground electrical installations, including feasibility, design review, and execution.
• Prepare detailed project plans, including scope, schedule, resources, materials, cost estimates, and risk assessments.
• Coordinate with engineers, clients, local authorities, and subcontractors to ensure alignment on project goals and timelines.

• Recruit, train, and manage a specialized in-house HDD team including drill operators, locators, and support staff.
• Provide technical guidance and mentorship to team members.
• Ensure continuous improvement through performance evaluations, skills development, and knowledge sharing.

• Technical Oversight & Quality Control.
• Ensure compliance with industry standards and company specifications, including NEMA, IEEE, and HDD best practices.
• Monitor drilling operations, fluid management, and back reaming processes for efficiency and minimal environmental impact.

• Serve as the primary point of contact for clients, utility owners, inspectors, and permitting authorities.
• Prepare and deliver progress reports, method statements, and as-built documentation.
• Manage change orders, claims, and contractual obligations in coordination with commercial and legal teams.

• Enforce strict safety protocols and environmental controls as per OSHA, local laws, and company policies.
• Conduct regular site audits and toolbox talks.
• Ensure accurate reporting of incidents and near-misses with corrective actions.

• Allocate and monitor manpower, materials, and equipment to ensure optimal utilisation.

• Control project budgets, track expenses, and ensure cost efficiency.
• Coordinate procurement of equipment, drilling tools, fluids, and consumables.
• Maintain inventory and asset records for HDD equipment and tools.

• Assist in tendering process.
• Identify and build business relationship with potential partner.